boosters | Cold paint remover for effective paint removal

Description

Shelf life of the paint stripper

When used correctly, our cold paint remover does not have to be replaced for years, but only cleaned and/or sharpened depending on the paint removal interval and the number of rims.

stripping time

The paint removal time in our offered and used pools for four rims is usually between 30 minutes and 2 hours.

The paint removal time is mainly influenced by the materials with which the rims were previously coated.

Mixing ratio of base and activator

The optimum mixing ratio of the paint stripper is 90% Cold Remover base agent and 10% Booster.

Number of stripped rims with one filling

A large number of rims is possible, since the paint stripper is usually not exchanged for years. An exact amount can largely be determined by the paint removal interval.

Our experience in continuous operation with our offered paint removal tanks with a capacity of 360 liters is as follows:

After approx. 1,000 rims have been stripped of paint, sharpening is necessary first (approx. 150 kg Cold Remover + 25 l Booster).

Instructions in case of drop in efficiency:

The efficiency usually decreases with the fill level. So that the optimal effect can be achieved again, only the basic agent "Cold Remover" has to be refilled and, if necessary, sharpened with our "Booster".

You can therefore make an adjustment yourself at any time.

Material impairments

Our wheel rim stripper is based on methylene chloride, contains alkaline activators and therefore does not affect the surface finish of aluminium. When removing paint from magnesium rims or rims with a particularly high proportion of magnesium, we recommend keeping the paint removal times as short as possible (e.g. not overnight, at weekends, etc.).

possible uses

• Aluminum
• Steel
• Stainless steel
• Magnesium (for short paint stripping times)

temperature for optimum efficiency

• Optimum effect from 12 °C
• Possible down to minus 15 °C, with a slight effect on the paint stripping time

Requirements for the paint stripping basin

No special basin is necessary.

Our recommendation: The paint removal tank specially developed by us with a stainless steel filter system and lockable lid for maximum effectiveness.

Instructions for use in closed rooms

A suitable ventilation system must be in place. Appropriate protective equipment (protective clothing and full face mask with fresh air supply) is also essential. We would be happy to advise you in detail on this.

Disposal Instructions

After the paint residue has dried, it can be properly disposed of with the residual waste. We recommend using a slag drum with a sieve to dry the slag.

The paint stripper does not usually have to be disposed of, as it can be used for many years if used correctly. If disposal is still necessary, you can commission a disposal company through us.

service

We offer our customers energy-efficient products and system solutions as well as delivery, service, maintenance and spare parts supply.

Shipment

The delivery time is only 5 working days, as we always have 5 tons in stock.